Top > Menu > XSD Series
* Features of XSD series
1. Huge dispasable volume and reasonable cost.
XSD25 : 150ppm case 12,500L - 4.4 JPY/L
XSD50 : 150ppm case 25,000L - 4.4 JPY/L
XSD75 : 150ppm case 37,500L - 4.4 JPY/L
2. With big size confirmation vessel.
Easy confirmation of disposed water
3. At the inside under space of XSD vessel do pre separation.
Expandable life time of element
4. No power supply equipment.
XSD series uses the pressure from electric drain for push condensate.
5. Because of very simple stracture, trouble free.
6. From 1981, we use only special filter for dispose emulsion.These is no posibility of occur sludge so easy hundling.
* XSD series treatment process
| * Disposed water |
 |
* Running cost calculation ( XSD50 / 150ppm )
| Condition : 22kW compressor, 25,000L/y condensate. |
*Cost for industrial waste supplier : 62,000 JPY ( above 25 JPY/L )
*Running cost : 110,000 JPY ( 4.4 JPY/L )
| 25,000L x 25 JPY/L = 625,000 JPY 110,000 JPY / 25,000L = 4.4 JPY/L |
| Cost merit per year | : 625,000 JPY - 110,000 JPY | = 515,000 JPY |
|
| Ratio of reducing cost | : 515,000 JPY / 625,000 JPY x 100% | = 82 % |
|
* DRAIN DESTROYER has ecological mind,it contribute to stop global warming.
|
 |
Page Top
* Parts name
|
* Condensate volume from air compressor (L/h)
Condition: Suction air temperature 30℃, compressed air temperatur 10℃, sunction air Rh 80%
Compressed air pressure 0.7MPa, Operating time 1 hour.
| kW | Condensate
volume |
kW | Condensate
volume |
|
kW | Condensate
volume |
kW | Condensate
volume |
| 0.2 | 0.03 |
7.5 | 1.2 |
55 | 12.5 |
400 | 89.2 |
| 0.4 | 0.07 |
15 | 2.5 |
75 | 17.0 |
500 | 111.5 |
| 0.75 | 0.12 |
22 | 5.0 |
110 | 22.3 |
600 | 133.8 |
| 1.5 | 0.25 |
25 | 6.0 |
125 | 27.9 |
700 | 156.1 |
| 2.2 | 0.36 |
30 | 7.1 |
150 | 33.5 |
800 | 178.4 |
| 3.7 | 0.61 |
37 | 8.4 |
225 | 50.2 |
900 | 200.7 |
| 5.5 | 0.91 |
45 | 9.1 |
300 | 66.9 |
1000 | 223.0 |
Attention : Above numbers are for summer, spring/autumn 2/5, winter 1/5, avarage a half of summer.
|
* Specifications
| Item / Model |
 |
 |
 |
| XSD25 |
XSD50 |
XSD75 |
| Compressor |
Screw type |
Refer to the Selection chart |
| Receipro type |
| Oil density at outlet |
Below 5ppm ( n-hexane ) |
| Disposal method |
Filter |
| Max disposable volume |
10L/h | 20L/h | 30L/h |
| Life of XSD vessel |
Refer to performance and running cost |
| Operating method |
Use electrical drain (Note 1) |
| Reducing pressure method |
Ofifice inside of strainer |
| Used element replacement |
No second idustrial waste ∴Depend on location |
| Operating temperature |
2-50℃ ∴Avoid freezing (Note 2) |
Maximun operation pressure/
inner/outer drainer |
Below 0.8MPa / Rc1/2 |
| Inlet pressure |
Below 0.3MPa |
Outer dimention
weight / color |
370(W)x280(D)x870(H)mm
27kg / Black |
710(W)x295(D)x970(H)mm
55kg / Black |
950(W)x295(D)x970(H)mm
80kg / Black |
| Note 1. |
Please use ELECTRIC TRAP2 drain at the upstream condensate line.
And when use SUPER TRAP, please read the manual carefuly and set timer as short as possible ( 3 sec ) |
| Note 2. |
At below 0℃ condition, please avoid freezing.
|
* XSD Vessel performance and running cost
| Items |
XSD25 |
XSD50 |
XSD75 |
| Oil dencity (Note 3)
| Total dispersable
volume (L) | Running cost
(JPY/L) |
Total dispersable
volume (L) | Running cost
(JPY/L) |
Total dispersable
volume (L) | Running cost
(JPY/L) |
| 100ppm
| 18,750 | 2.9 |
37,500 | 2.9 |
56,250 | 2.9 |
| 125ppm
| 15,000 | 3.7 |
30,000 | 3.7 |
45,000 | 3.7 |
| 150ppm
| 12,500 | 4.4 |
25,000 | 4.4 |
37,500 | 4.4 |
| 300ppm
| 6,250 | 8.8 |
12,500 | 8.8 |
18,750 | 8.8 |
| 450ppm
| 4,167 | 13.2 |
8,334 | 13.2 |
12,500 | 13.2 |
| Jadgement life time
| *The water of confirmation vessel become cloudy, it is period of replacement.
*As daily works, please check confirmation vessel. |
| Note 3. |
Depend on compressor operating condition, oil consumption volume, load ratio, atmothpheric is condition,
the total disposable volume will change. |
Page Top
| Copyright (C) 2004-2012 FUKUHARA Co., Ltd. All Rights Reserved. |
|